Vui lòng dùng định danh này để trích dẫn hoặc liên kết đến tài liệu này: http://10.1.1.57:8888/dspace/handle/hau/5713
Nhan đề: Recent Advances in the Design of Axially-Loaded Piles in Sandy Soils
Tác giả: Basu, D.
Salgado, R.
Prezzi, M.
Lee, J.
Từ khoá: Shafts
Numerical analysis
Vertical loads
Axial loads
Pipe piles
Driven piles
Load and resistance factor design
Soil properties
Năm xuất bản: 2005
Tóm tắt: The research performed in the last decade at Purdue University on the vertical load response and design of piles (particularly drilled shafts and pipe piles) is reviewed. Both numerical and experimental investigations were performed, and values for unit base and shaft resistance normalized with respect to cone resistance are proposed for design. The study takes into account the loading processes associated with the pile installation, and the corresponding alteration of soil properties that affect the pile response. The normalized unit resistances are provided for a relative settlement of 10%, which is widely used as a design criterion. A strong dependence of the normalized unit resistances on relative density has been observed and the suggested values account for the effect. Thus, the proposed normalized unit resistances account for the soil state and the loading processes, and can be used in design. Results with respect to IFR and PLR are provided as well, for open-ended piles.
Mô tả: Geo-Frontiers Congress 2005 January 24-26, 2005 | Austin, Texas, United States © 2005 American Society of Civil Engineers
Định danh: http://10.1.1.57:8888/dspace/handle/hau/5713
Bộ sưu tập: Báo cáo tiếng nước ngoài

Các tập tin trong tài liệu này:
Tập tin Mô tả Kích thước Định dạng  
443.07 kBAdobe PDFXem truc tuyen


Khi sử dụng các tài liệu trong Thư viện số phải tuân thủ Luật bản quyền.